Cost-EfficientOutdoor P10-P8 billboard
Best for long-distance roadside visibility and large advertising screens.
- Long-distance visibility
- Roadside advertising
- Large display formats
AV Solution Provider
LED Display Price in Bangladesh 2026
Browse LED display categories & related services
Showing 12 of 22 products under LED Display
1.25 mmSynoveta CX-0125 Indoor COB LED Display Cabinet
Starting from Tk 33,220.00(per sq.ft, indicative indoor price)
- Cabinet resolution: 512 × 384 pixels
- Cabinet: 640 × 480 × 48 mm
- Brightness: ≥650 nits
- Refresh rate: ≥7680 Hz
SynovetaIndoor COBCX Series
1.538 mmSynoveta CX-0153 Indoor COB LED Display Cabinet
Starting from Tk 24,580.00(per sq.ft, indicative indoor price)
- Cabinet resolution: 416 × 312 pixels
- Cabinet: 640 × 480 × 48 mm
- Brightness: ≥650 nits
- Refresh rate: ≥7680 Hz
SynovetaIndoor COBCX Series
1.86 mmSynoveta CX-0186 Indoor COB LED Display Cabinet
Starting from Tk 17,660.00(per sq.ft, indicative indoor price)
- Cabinet resolution: 344 × 258 pixels
- Cabinet: 640 × 480 × 48 mm
- Brightness: ≥650 nits
- Refresh rate: ≥7680 Hz
SynovetaIndoor COBCX Series
1.25 mmP1.25 Indoor LED Display Module
Starting from Tk 16,000.00(per sq.ft, indicative indoor price)
- Ultra fine pixel pitch P1.25
- Best for command/control room & studio
- High refresh & high grayscale performance
- Used for premium LED video wall applications
IndoorFine pitchControl room
1.53 mmP1.53 Indoor LED Display Module
Starting from Tk 14,200.00(per sq.ft, indicative indoor price)
- Pixel pitch P1.53 for close viewing
- Ideal for boardroom & showroom LED walls
- High refresh rate, camera-friendly
- Seamless large LED screen monitor
IndoorFine pitchBoardroom
1.667 mmP1.667 Indoor LED Display Module
Starting from Tk 10,200.00(per sq.ft, indicative indoor price)
- P1.667 indoor LED module
- Suitable for premium meeting & studio setups
- High contrast & wide viewing angle
- Used in long-duration 24/7 applications
IndoorFine pitch
1.86 mmP1.86 Indoor LED Display Module
Starting from Tk 9,800.00(per sq.ft, indicative indoor price)
- P1.86 indoor LED display module
- Perfect balance between price & resolution
- Ideal for training room & mid-size control room
- Supports NovaStar / Colorlight / Huidu systems
IndoorFine pitch
2.0 mmP2 Indoor LED Display Module
Starting from Tk 6,100.00(per sq.ft, indicative indoor price)
- High resolution P2 indoor LED screen
- Great for retail, showroom & corporate lobby
- Smooth video & text display
- Popular choice for premium LED wall
IndoorFine pitchShowroom
2.5 mmP2.5 Indoor LED Display Module (320×160mm)
Starting from Tk 5,750.00(per sq.ft, indicative indoor price)
- Module size: 320×160mm (standard)
- Ideal for conference room, showroom & studio
- Brightness: 800–1200 cd/m²
- Common choice for indoor LED video wall
IndoorPopularConference
3.0 mmP3 Indoor LED Display Module
Starting from Tk 5,400.00(per sq.ft, indicative indoor price)
- Good balance between cost & clarity
- Used in control room, masjid & training halls
- Comfortable viewing from 3–8m distance
- Supports graphics, text & live video
IndoorBudgetPrayer hall
3.076 mmP3.076 Indoor LED Display Module
Starting from Tk 4,700.00(per sq.ft, indicative indoor price)
- P3.076 indoor LED module for specific cabinet sizes
- Used where exact pixel mapping is required
- Supports NovaStar / Huidu controller ecosystem
IndoorSpecial size
2.5 mmP2.5 Outdoor LED Display Module
Starting from Tk 14,300.00(per sq.ft, indicative outdoor price)
- Ultra high-resolution outdoor LED screen
- Used for premium outdoor signage & façade
- High brightness with IP65 protection
OutdoorFine pitchHigh-end
Browse all products (full list)Open to jump to any product page (helps site navigation)
Indoor/Outdoor LED Display Price Per Sqft in Bangladesh
Use this quick snapshot to understand where your project may fit before requesting a BOQ. Final LED display price changes by screen size, pixel pitch, brightness, cabinet, controller, power supply, structure and installation scope.
Cost-Efficient
BalancedOutdoor P6-P4 display
Balanced clarity for building facade, shop front and city branding.
- Building facade displays
- Shop-front signage
- City branding
StandardIndoor P3-P2.5 video wall
Good for showroom, classroom, hall and corporate presentation use.
- Showroom video walls
- Classrooms & halls
- Corporate presentations
PremiumIndoor P2-P1.25 fine pitch
Best for close-view boardroom, control room and high-detail content.
- Close-view boardrooms
- Control-room displays
- High-detail content
Note: per sqft rates are planning references only. A complete LED display quotation should also check structure, installation height, cable route, controller setup, calibration, warranty and support scope.
What Clients Value Before Buying LED Display
Real consultation themes from project discussions
What Is an LED Display and How Does It Work?
An LED display is a complete digital screen system used for advertising, signage, and billboards - built by assembling many LED modules into one large display. Each module contains thousands of tiny LEDs (red, green, blue). When these LEDs turn on and off fast (with precise brightness control), they create pixels that form clear text, images, and video.
More details: LED Display Buying Guide (Bangladesh)
Input Source
HDMI / PC / Media player
LED Controller
Video processor
Receiving Card
Data distribution
LED Module
Display pixels
LED Display
Complete screen
SMD Technology
SMD uses individually packaged LED lamps that are inspected, sorted, surface-mounted and soldered to form a display module. Each package has its own solder joints, which can be affected by moisture, vibration and temperature changes.
Reference: AbsenGOB Technology
Glue-on-Board coats LED packages and the gaps between them with epoxy resin. This creates a smooth, continuous protective surface that helps resist impact and humidity, protecting fragile LEDs at the module edges and corners.
Reference: VanguardCOB Technology
Chip-on-Board bonds LED chips directly to a substrate and seals the chips and circuits together. This integrated structure reduces package solder-joint failure risks while improving resistance to dust, moisture and mechanical shock.
Reference: AbsenMIP LED Technology
Micro LED in Package uses mass transfer to place tiny flip-chip LEDs onto a packaging substrate. The packages are cut, tested and sorted into individual pixel devices, combining Micro LED chips with a discrete packaging structure.
Reference: LeyardExplore LED display components
LED display components overview.1) LED module - the building block that forms the screen surface.
2) Driver IC - controls each LED’s brightness (grayscale) and refresh stability, so content looks smooth and camera-friendly.
3) Receiving card - receives video data from the controller and maps it to the correct pixels on each cabinet/module.
4) Controller / video processor - scales and sends the content signal (HDMI/PC/media player) to the receiving cards.
5) Power supply - delivers stable DC power for LEDs and control cards with safe distribution and protection.
6) Cabinet + structure - holds modules, supports cooling/airflow, and (for outdoor) provides weather protection.
Want a deeper, Bangladesh-focused explanation (pixel pitch, indoor vs outdoor, controller ecosystem, power planning, and quotation checklist)? Read our detailed guide below.
More details: LED Display Buying Guide (Bangladesh)LED Display Technical Authority (Bangladesh)
This quick table helps buyers map pixel pitch with real viewing distance and practical use-case before finalizing BOQ, cabinet type, controller, and power planning.
| Pixel Pitch | Viewing Distance | Best Use | Cabinet Type | Refresh Rate | Power Consumption | Warranty Period |
|---|---|---|---|---|---|---|
| P1.25 - P2 | 1.5m - 4m | Boardroom, control room, premium indoor video wall | Die-cast aluminum / fine-pitch cabinet | >= 3840Hz | Typical 160 - 220 W/m2 | 1 - 2 years (project scope) |
| P2.5 - P4 | 3m - 8m | Showroom, hall, classroom, mosque display | Standard indoor iron/die-cast cabinet | >= 1920Hz (3840Hz preferred) | Typical 180 - 300 W/m2 | 1 - 2 years (project scope) |
| P5 - P6.67 | 6m - 15m | Outdoor signage, roadside branding | Outdoor weatherproof IP-rated cabinet | >= 1920Hz | Typical 220 - 380 W/m2 | 1 - 2 years (project scope) |
| P8 - P10 | 10m+ | Large digital billboard, highway display | Outdoor IP65 front / IP54 rear | >= 1920Hz | Typical 250 - 420 W/m2 | 1 - 2 years (project scope) |
Authorized Distributors & Global Technology Partners
Renex Digital works with established LED display, control system and power supply manufacturers to deliver reliable LED display solutions in Bangladesh. We are a channel partner of Qiangli, Cailiang, LAMPRO, Leyard, Absen and Synoveta for LED display technologies; NovaStar, Huidu and Colorlight for LED controllers and receiving cards; and Mean Well and G-Energy for professional LED display power supply solutions.
Through these technology partnerships, Renex Digital provides complete support for indoor LED displays, outdoor LED displays, digital billboards and rental LED screens—covering system design, component selection, installation, configuration, commissioning and after-sales service across Bangladesh.
ISO-oriented quality workflow
Dedicated LED engineering team
Industry-grade components only
Project-based support and on-site service
Renex Digital focuses on brightness stability, color accuracy and long-term performance across indoor, outdoor and rental LED display projects, supported by professional after-sales service throughout Bangladesh
Trusted by Public Sector, and Universities in Bangladesh
Renex Digital’s LED display project experience includes work for Dhaka Power Distribution Company (DPDC), Bangladesh Tourism Board, Bangladesh Fire Service & Civil Defence and Dominant International School. We support indoor, outdoor and rental LED projects across Bangladesh with planning, installation, commissioning and after-sales service.
.svg){kind=logo}
LED Display Price Per Square Feet in Bangladesh
Need a real LED display price per square feet in Bangladesh that you can actually use for approval, budgeting, and BOQ comparison? This section gives practical reference ranges for indoor LED display, outdoor LED billboard, and rental LED screen based on pixel pitch and common project scope - so you can shortlist the right option before requesting a quotation.
Keep in mind: the final LED screen price is not just “per sq.ft”. It changes with screen size, module quality, controller & receiving card ecosystem, power distribution, structure, installation conditions, and warranty + after-sales support. Use these ranges to compare offers safely - then request a BOQ-based quotation for the exact scope.
Indicative market reference. Request the latest BOQ-based quotation for current pricing.
Indoor
Tk 4,700 - 21,400 / sq.ft
Outdoor
Tk 3,800 - 16,680 / sq.ft
Rental
Tk 25,000 - 120,000 / day
| Indoor LED model | Pixel pitch | Warranty | Status | Approx. price (per sq.ft) |
|---|---|---|---|---|
| Synoveta CX-0125 Indoor COB LED Display Cabinet | 1.25 mm | Project warranty | Get latest quotation | 33,220.00 |
| Synoveta CX-0153 Indoor COB LED Display Cabinet | 1.538 mm | Project warranty | Get latest quotation | 24,580.00 |
| Synoveta CX-0186 Indoor COB LED Display Cabinet | 1.86 mm | Project warranty | Get latest quotation | 17,660.00 |
| P1.25 Indoor LED Display Module | 1.25 mm | Project warranty | Get latest quotation | 16,000 - 21,400 |
| P1.53 Indoor LED Display Module | 1.53 mm | Project warranty | Get latest quotation | 14,200 - 16,750 |
| P1.667 Indoor LED Display Module | 1.667 mm | Project warranty | Get latest quotation | 10,200 - 13,800 |
| P1.86 Indoor LED Display Module | 1.86 mm | Project warranty | Get latest quotation | 9,800 - 12,300 |
| P2 Indoor LED Display Module | 2.0 mm | Project warranty | Get latest quotation | 6,100 - 9,600 |
| P2.5 Indoor LED Display Module (320×160mm) | 2.5 mm | Project warranty | Get latest quotation | 5,750 - 8,200 |
| P3 Indoor LED Display Module | 3.0 mm | Project warranty | Get latest quotation | 5,400 - 7,300 |
| P3.076 Indoor LED Display Module | 3.076 mm | Project warranty | Get latest quotation | 4,700 - 6,400 |
| Outdoor LED model | Pixel pitch | Warranty | Status | Approx. price (per sq.ft) |
|---|---|---|---|---|
| P2.5 Outdoor LED Display Module | 2.5 mm | Project warranty | Get latest quotation | 14,300 - 16,570 |
| P3 Outdoor LED Display Module | 3.0 mm | Project warranty | Get latest quotation | 13,200 - 16,680 |
| P3.076 Outdoor LED Display Module | 3.076 mm | Project warranty | Get latest quotation | 7,800 - 10,400 |
| P3.91 Rental LED Module | 3.91 mm | Project warranty | Get latest quotation | 7,000 - 9,400 |
| P4 Outdoor LED Display Module | 4.0 mm | Project warranty | Get latest quotation | 6,200 - 8,200 |
| P5 Outdoor LED Display Module | 5.0 mm | Project warranty | Get latest quotation | 4,600 - 7,300 |
| P6 Outdoor LED Display Module | 6.0 mm | Project warranty | Get latest quotation | 5,750 - 9,450 |
| P6.67 Outdoor LED Display Module (320×160mm) | 6.67 mm | Project warranty | Get latest quotation | 4,300 - 6,900 |
| P8 Outdoor LED Display Module | 8.0 mm | Project warranty | Get latest quotation | 3,950 - 6,200 |
| P10 Outdoor LED Display Module | 10 mm | Project warranty | Get latest quotation | 3,800 - 5,200 |
Note
Prices are indicative for guidance only. Official quotation depends on size, structure, controller and installation requirements.
LED Display Price Breakdown in Bangladesh
If you are comparing LED display price in Bangladesh, don’t compare only a single per‑sq.ft rate. Real projects differ by pixel pitch, brightness, cabinet grade, controller ecosystem, and installation + structure scope. This breakdown helps you shortlist faster (indoor vs outdoor) and understand why quotations mismatch - then you can validate with a BOQ-level quotation for your exact site condition.
Outdoor LED Display Price (P10-P2.5)
Outdoor LED display price in Bangladesh mainly changes by pixel pitch, brightness target, weatherproof cabinet grade (IP), and structure/installation scope.
- P10-P8: budget-friendly for long-distance viewing (large billboards)
- P6-P5: balanced option for roadside branding and city advertising
- P4-P2.5: premium clarity for close-view outdoor campaigns and facade screens
Indoor LED Display Price (P3.076-P1.25)
Indoor LED display price in Bangladesh depends on close-view clarity, refresh rate, color uniformity, and service method (front/rear) for maintenance access.
- P3-P2.5: common choice for showroom, hall, classroom and mixed content
- P2-P1.86: premium indoor LED video wall with sharper text/graphics
- P1.53-P1.25: fine-pitch for boardroom/control-room close viewing
LED Display Resource Hub (Bangladesh)
This hub is built for Bangladesh buyers who want to decide fast and avoid wrong purchases. You get clear internal guides for indoor LED display,outdoor LED billboard, and rental LED screen planning - including what to compare in BOQ, what affects price, and what changes installation scope - so you can move from requirement to quotation with less confusion.
LED Display Trust & Quality in Bangladesh
Technical Confidence
Most clients first ask one question: Will this LED display stay stable after handover? We answer with a structured pre-sales process: requirement mapping, site-context analysis, and BOQ-level specification matching so you can decide with technical confidence, not guesswork.
Quality & Installation
We follow a quality framework aligned with proven Bangladesh market standards, including execution disciplines aligned with widely recognized supplier benchmarks. That means component-level validation, calibration uniformity, installation QA, and documented commissioning checkpoints for every project scope.
Long-term Support
Our contribution to Bangladesh's LED display market is long-term reliability: correct design, clean deployment, and measurable support. From quotation to maintenance planning, we build each solution so corporate, retail, and event clients get predictable performance over time.
Explore Related Solution Pages
These cluster pages cover user intent by use-case, budget type, and technical planning stage. This helps users and search engines understand your complete solution architecture.
Indoor LED Display
specification and buying guide
Outdoor LED Billboard
roadside and facade planning
LED Billboard
advertising and media planning
Rental LED Screen
event and temporary setup
LED Display
cost and configuration logic
Showroom LED Display
retail branding and close-view quality
Shop LED Display
storefront promotion and signage use
Conference Room LED Wall
boardroom and meeting-room planning
PA System Solutions
audio integration for projects
Interactive Flat Panel
education and corporate collaboration
LED Display Applications in Bangladesh
LED display solutions are used across Bangladesh for branding, real-time communication, and high-impact advertising. Selecting the right pixel pitch and brightness depends on where you install it.
Retail & Showroom LED Display
Video walls for promotions, product launches, and premium brand visibility inside showrooms.
Corporate Office / Boardroom LED Display
Presentation-ready screens with clean visuals for meetings, conference rooms, and lobbies.
Outdoor Billboard LED Display
High-brightness LED billboards for roadside advertising and building facade visibility.
Event & Stage Rental LED Display
Rental LED walls for concerts, exhibitions, weddings, and live events (camera-friendly setup).
Restaurant / Menu LED Signage Display
Digital menu boards and promotional signage for better customer engagement.
Control Room / Operations LED Display
Monitoring dashboards with stable color, clarity, and long-hour operation support.
Indoor vs Outdoor LED Display in Bangladesh
Use this comparison to quickly decide which LED display type suits your site. Final configuration depends on viewing distance, ambient light, and installation conditions.
| Compare features | Indoor LED Display | Outdoor LED Display |
|---|---|---|
| Best use-case | Showrooms, offices, studios, indoor video walls | Roadside billboards, facades, open areas |
| Pixel pitch range | Usually P1.25-P4 (closer viewing) | Usually P4-P10 (longer viewing) |
| Brightness | Balanced for comfort and clarity | High brightness for sunlight visibility |
| Weather protection | Not required | Requires weatherproof protection (e.g., IP-rated cabinets) |
| Maintenance access | Front or rear service (site dependent) | Often rear service; front service possible if needed |
| Key focus | Color uniformity, seamless alignment, comfort | Brightness, durability, protection, stability |
LED Display Technical Specs Guide
This section works as a technical baseline for decision-making. It explains the key variables that directly affect clarity, durability, budget, and after-sales complexity in real projects.
Pixel Pitch (P-value)
Distance between LEDs. Smaller pitch means higher resolution and better close-viewing clarity.
Brightness (nits)
Higher nits improve visibility. Outdoor LED displays usually require much higher brightness than indoor.
Refresh Rate
Higher refresh rate improves smoothness and camera-friendliness for studios and events.
IP Rating (Outdoor)
Protection against dust/water. Outdoor projects often require weatherproof cabinet protection.
Front / Rear Service
Maintenance access method. Choose based on installation space and maintenance convenience.
Power & Heat Management
Stable power supply, ventilation, and clean wiring reduce overheating and long-term failure risks.
Want to learn more?
This LED display guide explains optical layers and RGB color filtering, 1515 RGB LED packaging, and how pixel pitch (P4, P5, P6, P8, P10, P16) changes practical viewing distance.
Understand indoor/outdoor LED screen clarity before finalizing specification, BOQ, or quotation in Bangladesh.
Watch Technical Guide Video
LED Display Quotation Checklist in Bangladesh (BOQ-Ready)
Accurate quotation needs complete input data, not assumptions. If you share BOQ/tender documents, we can prepare a compliance-ready solution with practical implementation logic.
Required information
- Screen size (Width x Height)
- Indoor / Outdoor
- Viewing distance
- Installation location & mounting condition
- Content source (PC, media player, live camera, etc.)
Scope clarification
- Structure / frame included or not
- Electrical power line, earthing, surge protection
- Front-service vs rear-service preference
- Warranty period requirement
- Site readiness timeline
LED Display Solutions in Bangladesh
We deliver LED display as a full technical system, not only a product card. From indoor communication walls and showroom signage to outdoor billboards and rental event screens, every solution is designed for stable output, controlled deployment, and maintainable operation.
Requirement-matched component selection
We match LED module, controller, and power architecture to your project objective so performance targets are realistic and sustainable.
Direct sourcing with technical control
Direct factory/channel sourcing based on BOQ helps maintain quality consistency, availability, and commercially efficient pricing without sacrificing specs.
Clear warranty logic (1-3 years*)
Warranty duration and coverage are mapped to selected module/cabinet/controller class and written clearly in quotation terms to avoid ambiguity.
Engineering-led deployment & commissioning
Our team handles structure planning, electrical readiness checks, controller mapping, calibration, and final handover verification with documented checkpoints.
*Warranty duration depends on component/BOQ scope and is confirmed in quotation.
Selected China top brands and components we work with
- Qiangli Jucai / Qiangli Juge (LED Module)
- Cailiang (LED Module / Cabinet Ecosystem)
GKGD (LED Display Component Ecosystem)
Mean Well (Power Supply)
G-Energy (Power Supply)
Chuanglian / Chuang Lian (LED Control / System Component)
Absen (LED Display Solution Ecosystem)
NovaStar (LED Controller)
Huidu (LED Controller)
We source these brands and component lines through project-based channel support and direct supply coordination. Final brand, model, and availability are confirmed in quotation/BOQ based on scope, warranty terms, and stock position.
Why Our LED Display Panels Are Trusted by 100+ Businesses
Clients trust this approach because configuration, installation, and after-sales are aligned from day one. A successful LED deployment depends on engineering quality and support continuity, not hardware alone.
After-Sales Service That Matters
Troubleshooting guidance, spare planning and support process to reduce downtime risk.
Direct China Sourcing + BOQ Matching
We source based on BOQ requirement to ensure availability, warranty clarity and correct specs.
Delivery Snapshot (Project-Level)
Project Reach
Nationwide BD
Response Window
Within 24h*
Deployment Type
BOQ-Matched
Specification review before final quotation
Controller and power architecture planning
Structure and electrical readiness checklist
Handover guidance with support flow
*Response time depends on location, workload, and project scope.
How to Choose the Right Digital LED Display in Bangladesh
Selection should start from project objective, not model name only. We help you map requirement to technical variables so specification, cost, and lifecycle performance stay aligned.
Need analysis: viewing distance & pixel pitch
Match pixel pitch to viewing distance: P1.25-P2.5 for close viewing, P3-P4 for medium range, and P6-P10 for large outdoor sites.
Environmental fit: brightness & ambient light
Prioritize indoor viewing comfort and color consistency; choose higher brightness, often 5000+ nits, for outdoor daylight visibility.
Reliability design: IP rating & protection
Choose site-appropriate IP-rated cabinets to protect outdoor screens against rain, dust, and humidity.
Content quality: refresh rate & camera output
Higher refresh rates and stable controller settings reduce camera flicker and improve motion quality for studios and events.
Maintainability: cabinet build & service access
Select front or rear service for your site. Accurate cabinet alignment reduces visible seams and simplifies maintenance.
System stability: controller, PSU & redundancy
Plan controller and power architecture, redundancy, and spares to minimize downtime in critical installations.
Safety engineering: structure & electrical planning
Validate structural loads, mounting, earthing, and cable routes to reduce electrical, overheating, and installation risks.
Lifecycle support: warranty & spare readiness
Confirm warranty scope, spare modules, power supplies, receiving cards, and a clear support process for faster recovery.
The Right Display
for a Bigger Tomorrow
Make an informed decision with the right information and the right partner.
Why Renex Leads LED Display in Bangladesh
Renex Digital is not only a reseller of LED display products. Our strength comes from combining direct China sourcing, project-based technical selection, and practical Bangladesh market experience. Because we work closely with trusted manufacturers for LED modules, controllers, power supplies, cabinets and related parts, we can match customer demand more accurately, maintain better quality control, and offer commercially realistic pricing without unnecessary middle-layer cost.
Compliance-first BOQ engineering
We translate requirement into compliance-ready specs: pixel pitch, brightness, cabinet protection, controller ecosystem, and power load estimation.
Measured calibration quality
Commissioning focuses on seam consistency, brightness balance, color behavior, and playback stability for dependable day-to-day output.
Operational continuity after handover
We define spare planning and troubleshooting protocol early, so support response is faster and downtime impact stays controlled.
Transparent scope and delivery control
Clients get clear scope boundaries (structure/electrical/civil), timeline visibility, and deliverable clarity before execution starts.
More Than a ProductA Long-Term Partnership
Why clients choose us
A major strength of Renex Digital is our direct sourcing model through Nexen, our own product and supply initiative. Through Nexen, we bring LED modules, cabinets, controllers, power supplies and other essential display components directly from trusted top brands and manufacturers in China into the Bangladesh market. This gives us better control over product quality, specification accuracy and commercial pricing. Instead of depending on multiple middle layers, we can understand client demand more clearly, recommend the right configuration based on budget, viewing distance and use-case, and deliver a stronger balance of performance, warranty support and price.
Operational Assurance Snapshot
BOQ/spec alignment before procurement
Controller + power topology validation
Commissioning checklist and sign-off flow
Escalation-ready support process after handover
LED Display Solution Process in Bangladesh
We follow a method-based workflow to reduce mismatch, delay, and rework. If you share BOQ or tender specs, we can align faster with technical compliance and execution planning.
- Step 1
Discovery: requirement and site context
You share screen size, use-case, viewing distance, location media, and scope boundaries. We map functional needs to technical constraints.
- Step 2
Engineering proposal: BOQ and architecture
We prepare recommended architecture: pixel pitch, brightness, cabinet model, controller topology, power distribution, and spare strategy.
- Step 3
Execution: supply, install, commission
Execution includes logistics planning, safe installation, electrical/earthing validation, controller setup, calibration, and handover sign-off.
- Step 4
Sustainment: warranty and support lifecycle
Post-deployment support covers troubleshooting flow, warranty replacement logic, and maintenance guidance for stable long-term operation.
Project support highlights
- BOQ and tender specification review support
- Pixel pitch and screen-size recommendation
- Controller, power and installation planning
- Warranty guidance and after-sales response workflow
Engineering Notes for LED Display Projects in Bangladesh
LED display quotations can look similar at first, but small differences in scope can change the final cost, performance, and maintenance experience. These notes explain what should be confirmed before comparing suppliers, so your team can review the technical side of a proposal with more confidence.
Decide the scope before comparing price
Two LED display quotations are rarely comparable unless the scope is identical. These are the minimum scope points we recommend before price comparison:
- Indoor vs outdoor environment and expected brightness target.
- Viewing distance (primary factor for pixel pitch selection).
- Screen size (W × H) and target resolution/content type.
- Controller ecosystem and input sources (PC, media player, live camera, etc.).
- Structure + electrical scope: power load, earthing, surge protection, cable routing.
- Installation, calibration, testing, and handover scope (turnkey vs supply-only).
Pixel pitch: practical viewing-distance guidance
This is a simple starting point (final pitch depends on content density and budget). If your project has close-up text viewing, pitch selection should be more conservative.
| Common pitch | Typical viewing distance | Common use |
|---|---|---|
| P1.25 – P2.5 | ~1–3m | Boardroom, studio, control room, premium showroom |
| P2.5 – P3 | ~3–6m | Showroom, auditorium side screens, indoor signage |
| P3 – P4 | ~6–10m | Stage backdrop, mixed indoor/outdoor viewing |
| P6 – P10 | ~10m+ | Outdoor digital billboard / roadside advertising |
BOQ / quotation checklist (to avoid mismatch)
If you want quotations that are actually comparable, request these items in writing:
- Module + cabinet model, brightness target, refresh/scan type (as applicable).
- Controller model and receiving/sending card lineup (NovaStar/Huidu/Colorlight, etc.).
- Power supply class, load calculation, and protection plan (earthing/surge/MCB).
- Structure/mounting method and service access plan (front vs rear service).
- Commissioning scope: calibration, mapping, training, and handover checklist.
- Warranty coverage boundaries and spare strategy (recommended spare modules).
Reliability notes for Bangladesh sites
Most long-term issues come from power instability, heat, and maintenance access—not only from the LED modules. For stable performance, we plan ventilation, clean power distribution, earthing, and a practical maintenance path from day one.
Service Coverage, Trust and Technical Review
Renex Digital supports LED display planning, supply, installation and after-sales service for indoor, outdoor and rental projects across Bangladesh. This page is reviewed from a practical engineering perspective so buyers can compare pixel pitch, controller, power and maintenance scope before approving a quotation.
Dhaka city service support with nationwide project coordination across Bangladesh
Warranty coverage typically 1-3 years depending on module, cabinet and controller class
BOQ review, pixel pitch recommendation, installation planning and commissioning support
Phone, WhatsApp and on-site response workflow for maintenance and spare planning
Technical reviewer note
Reviewed by Renex Digital engineering team for BOQ readiness, installation fit and supportability in Bangladesh.
Coverage includes BOQ review, installation planning, commissioning support, warranty guidance and practical after-sales response workflow.
Selected project references
Real project references help validate execution capability beyond product listings.
Outdoor P6.67 LED Billboard – City Corporation
Rajshahi City Corporation
P6.67 - Outdoor LED Display
Indoor LED & PA System – Government Walkway Project
Gulshan Officers’ Quarter
P3 - Indoor LED + PA System
P2.5 Boardroom LED Video Wall
Dhaka, Bangladesh
P2.5 - Indoor LED Video Wall
FAQs About LED Display Solution
Client-focused answers with technical context, so you can validate feasibility, cost logic, and implementation readiness before final decision.
What is the LED display price per sqft in Bangladesh?
LED display price per sqft in Bangladesh usually depends on pixel pitch, indoor or outdoor use, module quality, brightness, cabinet type, controller, structure and installation scope. As a planning range, basic outdoor billboard projects often start lower per sqft, while fine-pitch indoor video walls cost more because they need higher resolution and closer-view clarity. For accurate pricing, screen size, viewing distance, location and BOQ scope should be checked first.
What is the P10 outdoor LED display price in Bangladesh?
P10 outdoor LED display is usually one of the most budget-friendly options for long-distance roadside billboard and large outdoor advertising use. The final P10 outdoor LED display price in Bangladesh depends on module brand, brightness level, cabinet/weatherproofing, steel structure, controller, power supply and installation height. Share your required screen size and location to calculate a proper project quotation.
What is the P2.5 indoor LED display price in Bangladesh?
P2.5 indoor LED display price is higher than many outdoor long-distance options because it is used for closer viewing in showroom, conference room, hall, classroom and corporate video wall projects. Price changes by module quality, refresh rate, cabinet type, controller system, screen size and installation access. For close-view indoor use, P2.5 is popular because it balances clarity and cost.
Is installation cost included in LED display pricing?
Sometimes installation is included and sometimes it is separate. It depends on quotation scope. A complete LED display project may include module/cabinet, controller, power supply, cable, structure, civil work, installation, calibration, testing and after-sales support. Renex Digital normally clarifies hardware price and installation/structure scope separately so clients can compare BOQ clearly.
How is the total cost of an outdoor LED billboard calculated?
Outdoor LED billboard total cost is calculated from screen size, pixel pitch, brightness, cabinet/IP protection, steel structure, installation height, controller/video processor, power distribution, cable route, content system, service access and warranty scope. Two same-size billboards can have different budgets if one needs stronger structure, higher brightness or more complex installation.
Which pixel pitch is best for outdoor LED display in Bangladesh?
For outdoor LED display in Bangladesh, P10, P8, P6 and P5 are commonly used depending on viewing distance and content type. For long-distance roadside billboard, P10 or P8 is practical. For closer viewing and sharper advertising visuals, P6 or P5 may be better.
Which pixel pitch is best for indoor LED display in Bangladesh?
For indoor LED display in Bangladesh, common pixel pitches include P2.5, P2, P1.86, P1.53 and P1.25. If viewers sit close to the screen, a finer pitch gives better clarity. For showroom, boardroom and premium indoor video wall, smaller pitch is usually preferred.
What warranty and maintenance support do you provide for LED display projects?
Warranty and maintenance support depend on the project scope, product configuration and quotation terms. Renex Digital can support installation checking, controller setup, calibration, troubleshooting, spare planning and after-sales guidance so the LED display remains serviceable after handover.
Need a complete LED display solution?
Share your requirement or BOQ and we will propose a complete solution path with specification, controller, power, structure, and deployment support.